Skip to content
FREDERICKSBURGPAVING AND CONSTRUCTIONFREDERICKSBURGPAVING AND CONSTRUCTION
Brick chimney rising above a shingled roof

Repairs · Rebuilds · Maintenance

Chimney

From the crown to the flashing, masonry chimneys done right.

A chimney lives in the worst spot on your house, up where sun, rain, and freeze-thaw hit hardest. We repair, rebuild, and maintain masonry chimneys: crowns, caps, flashing, repointing, and full rebuilds from the roofline up.

Most chimney damage starts at the top. A cracked crown lets water into the brick; the water freezes, pops the faces off the masonry (spalling), and works down the stack, and by the time you see stains on a ceiling, it's been going on for years. The fix is almost always cheaper the earlier it's caught: a new crown and cap this year beats a roofline rebuild in five.

We handle the full range: repointing eroded mortar joints, replacing spalled brick, casting new crowns, installing caps and chase covers, re-flashing where the chimney meets the roof, and complete teardown-and-rebuild when the structure is too far gone. If you've got a leaning stack or falling brick, have us look at it promptly, that one is a safety issue.

Talk to Us About Your Project

Free estimates across Milford, Fredericksburg, and Caroline County.

(826) 251-1895fredericksburgpaving@gmail.com

What Our Chimney Work Covers

If it is not on the list, ask. It is usually something we handle.

Chimney repointing

Eroded mortar joints ground out and repacked, the core repair that saves old chimneys.

Crown repair & recasting

The concrete cap that sheds water off the top, rebuilt with drip edges that protect the brick.

Caps & chase covers

Stainless caps that keep rain, birds, and squirrels out of the flue.

Brick replacement

Spalled and cracked brick cut out and replaced with the closest match available.

Flashing repair

The roof-to-chimney joint re-flashed in metal, the most common 'chimney leak' fix.

Full & partial rebuilds

From the roofline up, or from the ground: leaning or crumbling stacks rebuilt safely.

How Every Project Runs

The same simple process whether it is a chimney cap or a full driveway.

  1. Walk the Job

    We come out, look at the project with you, and give you a free, no-pressure estimate with a straight price.

  2. Prep It Right

    The unglamorous part that decides everything: demolition, grading, base work, and protection for the areas we are not touching.

  3. Build It Strong

    Quality materials installed the correct way, with the prep and details that make the work last.

  4. Leave It Clean

    Full cleanup, a final walkthrough with you, and clear guidance on care. We are not done until you are happy.

Common Questions

My chimney has white stains, what is that?

Efflorescence: minerals left behind as water moves through the masonry. It's a sign the chimney is absorbing water, and it deserves a look before freeze-thaw does real damage.

The bricks are flaking apart. Can it be fixed?

Spalled brick can't be un-spalled, but we replace damaged units and fix the water source, a bad crown or missing cap is usually the culprit.

Do I really need a chimney cap?

It's the cheapest protection a chimney can get. It keeps out rain and animals and shields the flue, we can install one in a single visit.

Need Chimney Work Done Right?

Call for a free estimate. We will take a look and give you a straight answer.

Call Now · (826) 251-1895